Double Acting Oil Pump High Pressure Pump With Electric Engine For Overhead Line Transmission

Use and Characteristics

Double speed high performance pumps, built in 10000Psi pressure overflow valve, can ensure the maximum

flow when maximum pressure.Standard of can see an oil window, observe the location of oil, with the normal operation that assures machine;Equipped with low noise pure aluminum alloy enclosure motor and light weight, convenient to move.

Can choose to equip long range wire to control a switch, easy to long-distance to leave an operate.Use the following Suggestions 200 T of hydraulic cylinder

Application

For a variety of wire, strand crimping, reinforcement, cutting jobs, it is the construction of power transmission line construction indispensable work tool. Change the hydraulic pump to work as an independent source, also used in other forms of hydraulic actuators, and versatile.

Technical specification below for your reference:

DAILY MAINTENANCE

The life,reliablity,and safety of the tool is dependent on proper maintenance.Clean all surfaces including head,die seat,ram,and body.

Inspect for wear and damage.Worn or damaged parts may malfunction during operation.

All parts must be replaced with new parts if signs of wear or damage are evident.

Keep Lable Set clean and legible.Replace decales when necessary.

Manufacturer recommends regular testing for proper pressure and operation.

Test at least every 6 months,test more often under heavy usage.

GENERAL INFORMATION

IMPORTANT:Extreme caution should be used to prevent the entry of this material into th unit.Wipe off all couplings and fittings before connecting to unit.Be sure that any pump to be used with the compression tool is clean and free of dirt and contamminants.

PERIODIC MAINTENANCE:Occasionally lubricate die stop plunger assemblies.Use of a molybdenum disulfide grease is recommended.Pull pin and pivot pin assemblies should also be cleaned and lubricated to prevent sticking.

Oil LEAKAGE:A small amount of seepage from the piston and pump seals is normal and necessary to aid in the lubrication of the moving parts.Excessive leakage may indicate the need for seal replacement and should be performed only by an authorized reliable service center

Diagram

Practical Application